 鲜花( 11)  鸡蛋( 0)
|
本帖最后由 vieri 于 2014-1-19 12:26 编辑 . b0 k; A* f0 P7 |3 a
) }; P: h* V$ Y, B
Spray foam should have a higher averaged R value per inch thickness compared to regular batt insulation, and last longer. If you want the same R value, you need less thick spray foam than regular batt insulation. To compare the cost, you have to know how much R is required as per code, and calculate the required thickness and then calculate the price difference, this is my understanding, anyway, "the required R value as per code affects the insulation thickness, and the insulation thickness affects the price", hope this helps, |
|
狗仔卡
发表于 2014-1-19 10:46
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
